 
|
| HD11-1HT-O, HD11-1HT-M |
11" Wide Even Heat Hot Top Range attachment with storage base, or as modular top.
Standard Features:
- Stainless steel front and sides STANDARD
- 6" (152mm) chrome steel adjustable legs
- Adjustable stainless steel front rail 6-1/16" (154mm) to
7-5/8" (194mm)
- One (1), 30,000 BTU (8.8 kW),“H-Type”Cast-Iron Burner, per Extra Heavy 11" W, 7/8" (thick) top section
- Automatic Single Standing Pilot ignition.
- 1-1/4" NPT front manifold.
- Storage base interior is aluminized steel.
- One year limited parts & labor warranty, (USA and Canada only)
Optional Features:
- Stainless steel back rear panel
- Stainless steel common front rail up to 68" (1728mm) wide, (No additional charge)
- Rear gas connection on select models, 3/4 or 1" NPT
- End caps and cover (no charge)- Must specify
- Polyurethane non-marking swivel casters (2) w/front brakes.
- Storage base shelf-aluminized or stainless steel
- Single deck stainless steel high shelf
- 10" (254 mm), 17" (432mm) 22.375" (568mm)
34.375" (873mm) high stainless steel backguard
|
|
|
Short Form Specifications:
Heavy-Duty “Medallion Series” gas 11" Hot Top attachment with storage
base, Model : HD11-HT-0 manufactured by American Range. Storage Base with removable hinged door. To have stainless steel front and sides with 6"
chrome legs (unless otherwise specified). One (1) 11" wide x 7/8" thick even heat heavy duty hot top totaling 30,000 Btu/hr. Unit to be 11-3/8" (288mm) wide and 38" (965mm) deep with front rail fully extended. Adjustable front rail maximum of 7-5/8" (194mm). Specify Natural gas (NG) or Liquid Propane gas (LP). UL, CUL, NSF, MEA listed. (also available as a Modular Top-Model: HD11-HT-M). |
| Technical Specifications: |
 |
| Exterior Dimensions |
| Model # |
HD11-1HT-0 |
HD11-1HT-M |
| Width |
11-1/4"/285mm
|
11-1/4"/285mm |
| Depth |
38"/965mm (Rail out Dim)
|
38"/965mm |
| Height w/NSF Legs |
36"/914mm
|
36" (914mm) w/stand |
| Height Less NSF Legs |
36"/914mm
|
6-7/8"/175mm (less stand) |
|
| Storage Base Interior |
| Width |
6-3/4" (171mm) |
N/A |
| Depth |
30" (762mm) |
N/A |
| Height |
20" (508mm) |
N/A |
| Unit Weight (LB/KG) |
185/84 |
110/50 |
|
| INPUT-BTU/hr (N-Gas) |
HD11-2-O |
kW Eq. |
HD11-2-M |
kW Eq. |
| O/T Burner (30,000 BTU ea) |
30,000 |
8.79 |
30,000 |
8.79 |
| TOTAL |
30,000 |
8.79 |
30,000 |
8.79 |
|
|
| O = Storage Base M = Modular Top |
Installation Notes:
Combustible Wall Clearances
Sides: 6" (152mm)
Back: 6" (152mm)
For reduced clearances, refer to ANSI Z223.1/NFPA #54 and CAN/CGA B149.
Entry Clearance:
Crated: 16-1/4" (413mm)
Uncreated: 11-7/8" (302mm)
Manifold Pressure:
Natural 6 W.C. (15 mbar)
Propane 10 W.C. (25 mbar)
NOTE: Data applies only to North America.
* Please specify gas type when ordering. |
|
Gas Input Ratings shown here are for installations up to 2,000 ft (610m) above sea level. Specify altitudes over 2,000 ft.
Commercial cooking equipment requires and adequate ventilation system. For additional information, refer to to the National Fire Protection Associations standard NFPA96 Vapor Removal from Cooking Equipment (For North America only).
Because of continuing product improvement these specifications are subject to change without notice.
|
|
|
